[[Updated Keyboard Template|http://www.shockwaveproductions.com/bob/update/keycards.zip ]]\n\n[[Spitfire Checklist|http://www.mindspring.com/~grahamjt/Spitfire_Checklist.pdf]]\n\n[[Hurricane Checklist|http://www.mindspring.com/~grahamjt/Hurricane_Checklist.pdf]]
[[RRR Flight Model Preview|http://www.shockwaveproductions.com/bob_dev/FM_RRR-3-18-07.rar]]\n\n+++[Notes from BlueSix on the RRR Flight Model]\nIn keeping with our philosophy of progressing enhancing the fidelity of the BoB II Flight Models, we have devised and evaluated a number of incremental FM improvements subsequent to Patch 2.05, and are making these available for your preview and use. Three of these changes involve the entire range of player-flyable aircraft. Firstly, increased induced drag should be evident in more realistic energy bleed during manoeuvres and while preparing to land. Secondly, adjustments to the AI FMs have addressed the longstanding issue of AI-flown aircraft being faster than the same aircraft when player-flown. Finally, the global change most apparent to the player involves roll rates - the maximum achievable roll rates for both player- and AI-flown FMs have been reduced considerably. Although this change in roll performance is very noticeable initially, Beta testers have noted that they quickly adjusted, and saw improvements both in the quality of their own flying and in the manoeuvring of the AI-flown aircraft, with no loss of immersiveness. Note that these reduced roll rates still remain somewhat in excess of real world figures; the gap will be closed further in the next coordinated FM update (see "Future FM Plans" below). \n\nOther minor FM improvements for specific aircraft types include: \n\na. adjustment to Rolls Royce and Daimler Benz engine output at various altitudes. In the case of the former, this change reflects the use of 100 octane avgas and higher boost levels, and addresses a shortfall in the low level, straight and level maximum speeds of the two RAF fighters in the current FM; \n\nb. slight relocation of the centre of gravity of the Bf109, to impart additional longitudinal stability and make manoeuvring and landing somewhat easier; \n\nc. a number of minor dimensional corrections to the Spitfire, and one major correction (fin/rudder area) which should reduce the side to side oscillation seen occasionally when bringing guns to bear on target; \n\nd. several changes to the Ju87 - in particular, dive brake effectiveness has been increased to limit terminal velocity in the 80 degree delivery to approximately 540 kph, both maximum straight and level and landing speeds have been reduced, and the pitch trim change due to flaps has been neutralized to reflect the automatic compensation mechanism found in the RW aircraft; and \n\ne. slight adjustment to the effectiveness of the elevator trim of the Bf110, in anticipation of a related code improvement to be included with Patch 2.06. Similar elevator trim changes have been made to the Spitfire, Hurricane and Stuka. \n\nBoB II players interested in previewing these FM changes are invited to download them here: \n\nhttp://www.shockwaveproductions.com/bob_dev/FM_RRR-3-18-07.rar \n\nNote: these files must be installed in the Battle of Britain II \s Models folder. As always, it is recommended that users back up the contents of this folder before installing the updated files. \n\n\n\nFuture FM Plans. Both the Bf110 and the Ju87 FM require considerable further work to bring them up to the expected standard. Our intent is to pursue this in concert with the next coordinated FM update; work on this has already begun. A key feature of this update will be incorporation of more representative wing airfoil performance data, in place of the simplified approach taken by Rowan and incorporated in all BoB II FMs to this point. This change is significant and will require considerable research as well as a number of supporting improvements to the FM code - it is therefore some way off. \n\nIn the interim, the FM improvements at the link above are offered as an option for your preview and use." \n\n\nHope this sounds OK. \n\nBest wishes, \n\nKen\n===\n\n\n[[New Desktop Icons |http://shockwaveproductions.com/forum/viewtopic.php?t=2652]]\n\n
!Cellinsky's Terrain\n\n<html><img src="http://img.photobucket.com/albums/v41/vadenstick/Cellinsky_after.jpg" width="320" height="240" alt="Cellinsky's Terrain" /></html>\n\n[[Download Cellinsky Terrain|http://www.airwarfare.com/Sims/GMX%20BOB/textures.htm#002]]\n\n[[Download Cellinsky Fartiles|http://s22.quicksharing.com/v/3865466/FarTiles_Cellinsky.rar.html]]\n\n/%\n[img[Cellinsky's Terrain|http://img.photobucket.com/albums/v41/vadenstick/Cellinsky_after.jpg]]\n%/\n\n!Rummy's Terrain\n\n<html><img src="http://img.photobucket.com/albums/v41/vadenstick/afterBatch.jpg" width="320" height="240" alt="Rummy's Terrain" /></html>\n\nRummy Terrain\n\nRummy Fartiles\n\n/%\n[img[Rummy's Terrain|http://img.photobucket.com/albums/v41/vadenstick/afterBatch.jpg]]\n%/\n\n!''Pelican72's "Peliland" Terrain v1.0''\n\n<html><img src="http://www.checksix-fr.com/bibliotheque/photomaxi/im_C6_1167158588.jpg" width="320" height="240" alt="Peliland Terrain" /></html>\n\n[[Peliland v1.0 Terrain|http://www.checksix-fr.com/news/index.php?page=detail&ID=6382]]\n\n[[Peliland v1.0 Fartiles|http://www.checksix-fr.com/news/index.php?page=detail&ID=6392]]\n\n\n<html><img src="http://www.checksix-fr.com/bibliotheque/photomaxi/im_C6_1138559232.jpg" width="320" height="240" alt="Pelican72's White Cliffs" /></html>\n\n[[Pelican72's White Cliffs|http://www.checksix-fr.com/bibliotheque/index.php?page=detail&ID=4328]]\n
[[Shockwave Productions|http://shockwaveproductions.com/]]\n\n[[Shockwave Forums|http://shockwaveproductions.com/forum/]]\n\n[[SimHQ Forums|http://www.simhq.com/forum/ubbthreads.php?ubb=postlist&Board=75&page=1]]\n\n[[Airwarfare BOB2|http://www.airwarfare.com/Sims/GMX%20BOB/]]\n\n[[Stickman's Website|http://www.angelfire.com/mech/stickman1/]]\n\n\n
GettingStarted\n\n[[BOB2 Terrain Mods]]\n\n[[BOB2 Mods]]\n\n[[BOB2 Docs]]\n\n[[BOB2 Websites]]
/***\n|Name|NestedSlidersPlugin|\n|Source|http://www.TiddlyTools.com/#NestedSlidersPlugin|\n|Version|2.0.2|\n|Author|Eric Shulman - ELS Design Studios|\n|License|http://www.TiddlyTools.com/#LegalStatements <<br>>and [[Creative Commons Attribution-ShareAlike 2.5 License|http://creativecommons.org/licenses/by-sa/2.5/]]|\n|~CoreVersion|2.1|\n|Type|plugin|\n|Requires||\n|Overrides|Slider.prototype.stop|\n|Description|Make any tiddler content into an expandable 'slider' panel, without needing to create a separate tiddler to contain the slider content.|\n\n++++!!!!![Configuration]>\nDebugging messages for 'lazy sliders' deferred rendering:\n<<option chkDebugLazySliderDefer>> show debugging alert when deferring slider rendering\n<<option chkDebugLazySliderRender>> show debugging alert when deferred slider is actually rendered\n===\n++++!!!!![Usage]>\nWhen installed, this plugin adds new wiki syntax for embedding 'slider' panels directly into tiddler content. Use {{{+++}}} and {{{===}}} to delimit the slider content. You can also 'nest' these sliders as deep as you like (see complex nesting example below), so that expandable 'tree-like' hierarchical displays can be created. This is most useful when converting existing in-line text content to create in-line annotations, footnotes, context-sensitive help, or other subordinate information displays.\n\nAdditional optional syntax elements let you specify\n*default to open\n*cookiename\n*heading level\n*floater (with optional CSS width value)\n*mouse auto rollover\n*custom class/label/tooltip/accesskey\n*automatic blockquote\n*deferred rendering\nThe complete syntax, using all options, is:\n//{{{\n++++(cookiename)!!!!!^width^*{{class{[label=key|tooltip]}}}>...\ncontent goes here\n===\n//}}}\nwhere:\n* {{{+++}}} (or {{{++++}}}) and {{{===}}}^^\nmarks the start and end of the slider definition, respectively. When the extra {{{+}}} is used, the slider will be open when initially displayed.^^\n* {{{(cookiename)}}}^^\nsaves the slider opened/closed state, and restores this state whenever the slider is re-rendered.^^\n* {{{!}}} through {{{!!!!!}}}^^\ndisplays the slider label using a formatted headline (Hn) style instead of a button/link style^^\n* {{{^width^}}} (or just {{{^}}})^^\nmakes the slider 'float' on top of other content rather than shifting that content downward. 'width' must be a valid CSS value (e.g., "30em", "180px", "50%", etc.). If omitted, the default width is "auto" (i.e., fit to content)^^\n* {{{*}}}^^\nautomatically opens/closes slider on "rollover" as well as when clicked^^\n* {{{{{class{[label=key|tooltip]}}}}}}^^\nuses custom label/tooltip/accesskey. {{{{{class{...}}}}}}, {{{=key}}} and {{{|tooltip}}} are optional. 'class' is any valid CSS class name, used to style the slider label text. 'key' must be a ''single letter only''. Default labels/tootips are: ">" (more) and "<" (less), with no default access key assignment.^^\n* {{{">"}}} //(without the quotes)//^^\nautomatically adds blockquote formatting to slider content^^\n* {{{"..."}}} //(without the quotes)//^^\ndefers rendering of closed sliders until the first time they are opened. //Note: deferred rendering may produce unexpected results in some cases. Use with care.//^^\n\n//Note: to make slider definitions easier to read and recognize when editing a tiddler, newlines immediately following the {{{+++}}} 'start slider' or preceding the {{{===}}} 'end slider' sequence are automatically supressed so that excess whitespace is eliminated from the output.//\n===\n++++!!!!![Examples]>\nsimple in-line slider: \n{{{\n+++\n content\n===\n}}}\n+++\n content\n===\n----\nuse a custom label and tooltip: \n{{{\n+++[label|tooltip]\n content\n===\n}}}\n+++[label|tooltip]\n content\n===\n----\ncontent automatically blockquoted: \n{{{\n+++>\n content\n===\n}}}\n+++>\n content\n===\n----\nall options combined //(default open, cookie, heading, sized floater, rollover, class, label/tooltip/key, blockquoted, deferred)//\n{{{\n++++(testcookie)!!!^30em^*{{big{[label=Z|click or press Alt-Z to open]}}}>...\n content\n===\n}}}\n++++(testcookie)!!!^30em^*{{big{[label=Z|click or press Alt-Z to open]}}}>...\n content\n===\n----\ncomplex nesting example:\n{{{\n+++^[get info...=I|click for information or press Alt-I]\n put some general information here, plus a floating slider with more specific info:\n +++^10em^[view details...|click for details]\n put some detail here, which could include a rollover with a +++^25em^*[glossary definition]explaining technical terms===\n ===\n===\n}}}\n+++^[get info...=I|click for information or press Alt-I]\n put some general information here, plus a floating slider with more specific info:\n +++^10em^[view details...|click for details]\n put some detail here, which could include a rollover with a +++^25em^*[glossary definition]explaining technical terms===\n ===\n===\n===\n!!!!!Installation\n<<<\nimport (or copy/paste) the following tiddlers into your document:\n''NestedSlidersPlugin'' (tagged with <<tag systemConfig>>)\n<<<\n!!!!!Revision History\n<<<\n''2007.03.01 - 2.0.2'' for TW2.2+, hijack Morpher.prototype.stop so that "overflow:hidden" can be reset to "overflow:visible" after animation ends\n''2007.03.01 - 2.0.1'' in hijack for Slider.prototype.stop, use apply() to pass params to core function\n''2006.07.28 - 2.0.0'' added custom class syntax around label/tip/key syntax: {{{{{classname{[label=key|tip]}}}}}}\n''2006.07.25 - 1.9.3'' when parsing slider, save default open/closed state in button element, then in onClickNestedSlider(), if slider state matches saved default, instead of saving cookie, delete it. Significantly reduces the 'cookie overhead' when default slider states are used.\n''2006.06.29 - 1.9.2'' in onClickNestedSlider(), when setting focus to first control, skip over type="hidden"\n''2006.06.22 - 1.9.1'' added panel.defaultPanelWidth to save requested panel width, even after resizing has changed the style value\n''2006.05.11 - 1.9.0'' added optional '^width^' syntax for floating sliders and '=key' syntax for setting an access key on a slider label\n''2006.05.09 - 1.8.0'' in onClickNestedSlider(), when showing panel, set focus to first child input/textarea/select element\n''2006.04.24 - 1.7.8'' in adjustSliderPos(), if floating panel is contained inside another floating panel, subtract offset of containing panel to find correct position\n''2006.02.16 - 1.7.7'' corrected deferred rendering to account for use-case where show/hide state is tracked in a cookie\n''2006.02.15 - 1.7.6'' in adjustSliderPos(), ensure that floating panel is positioned completely within the browser window (i.e., does not go beyond the right edge of the browser window)\n''2006.02.04 - 1.7.5'' add 'var' to unintended global variable declarations to avoid FireFox crash bug when assigning to globals\n''2006.01.18 - 1.7.4'' only define adjustSliderPos() function if it has not already been provided by another plugin. This lets other plugins 'hijack' the function even when they are loaded first.\n''2006.01.16 - 1.7.3'' added adjustSliderPos(place,btn,panel,panelClass) function to permit specialized logic for placement of floating panels. While it provides improved placement for many uses of floating panels, it exhibits a relative offset positioning error when used within *nested* floating panels. Short-term workaround is to only adjust the position for 'top-level' floaters.\n''2006.01.16 - 1.7.2'' added button property to slider panel elements so that slider panel can tell which button it belongs to. Also, re-activated and corrected animation handling so that nested sliders aren't clipped by hijacking Slider.prototype.stop so that "overflow:hidden" can be reset to "overflow:visible" after animation ends\n''2006.01.14 - 1.7.1'' added optional "^" syntax for floating panels. Defines new CSS class, ".floatingPanel", as an alternative for standard in-line ".sliderPanel" styles.\n''2006.01.14 - 1.7.0'' added optional "*" syntax for rollover handling to show/hide slider without requiring a click (Based on a suggestion by tw4efl)\n''2006.01.03 - 1.6.2'' When using optional "!" heading style, instead of creating a clickable "Hn" element, create an "A" element inside the "Hn" element. (allows click-through in SlideShowPlugin, which captures nearly all click events, except for hyperlinks)\n''2005.12.15 - 1.6.1'' added optional "..." syntax to invoke deferred ('lazy') rendering for initially hidden sliders\nremoved checkbox option for 'global' application of lazy sliders\n''2005.11.25 - 1.6.0'' added optional handling for 'lazy sliders' (deferred rendering for initially hidden sliders)\n''2005.11.21 - 1.5.1'' revised regular expressions: if present, a single newline //preceding// and/or //following// a slider definition will be suppressed so start/end syntax can be place on separate lines in the tiddler 'source' for improved readability. Similarly, any whitespace (newlines, tabs, spaces, etc.) trailing the 'start slider' syntax or preceding the 'end slider' syntax is also suppressed.\n''2005.11.20 - 1.5.0'' added (cookiename) syntax for optional tracking and restoring of slider open/close state\n''2005.11.11 - 1.4.0'' added !!!!! syntax to render slider label as a header (Hn) style instead of a button/link style\n''2005.11.07 - 1.3.0'' removed alternative syntax {{{(((}}} and {{{)))}}} (so they can be used by other formatting extensions) and simplified/improved regular expressions to trim multiple excess newlines\n''2005.11.05 - 1.2.1'' changed name to NestedSlidersPlugin\n''2005.11.04 - 1.2.0'' added alternative character-mode syntax {{{(((}}} and {{{)))}}}\ntweaked "eat newlines" logic for line-mode {{{+++}}} and {{{===}}} syntax\n''2005.11.03 - 1.1.1'' fixed toggling of default tooltips ("more..." and "less...") when a non-default button label is used. code cleanup, added documentation\n''2005.11.03 - 1.1.0'' changed delimiter syntax from {{{(((}}} and {{{)))}}} to {{{+++}}} and {{{===}}}. changed name to EasySlidersPlugin\n''2005.11.03 - 1.0.0'' initial public release\n<<<\n!!!!!Credits\n<<<\nThis feature was implemented by EricShulman from [[ELS Design Studios|http:/www.elsdesign.com]] with initial research and suggestions from RodneyGomes, GeoffSlocock, and PaulPetterson.\n<<<\n!!!!!Code\n***/\n//{{{\nversion.extensions.nestedSliders = {major: 2, minor: 0, revision: 2, date: new Date(2007,3,2)};\n//}}}\n\n//{{{\n// options for deferred rendering of sliders that are not initially displayed\nif (config.options.chkDebugLazySliderDefer==undefined) config.options.chkDebugLazySliderDefer=false;\nif (config.options.chkDebugLazySliderRender==undefined) config.options.chkDebugLazySliderRender=false;\n\n// default styles for 'floating' class\nsetStylesheet(".floatingPanel { position:absolute; z-index:10; padding:0.5em; margin:0em; \s\n background-color:#eee; color:#000; border:1px solid #000; text-align:left; }","floatingPanelStylesheet");\n//}}}\n\n//{{{\nconfig.formatters.push( {\n name: "nestedSliders",\n match: "\s\sn?\s\s+{3}",\n terminator: "\s\ss*\s\s={3}\s\sn?",\n lookahead: "\s\sn?\s\s+{3}(\s\s+)?(\s\s([^\s\s)]*\s\s))?(\s\s!*)?(\s\s^(?:[^\s\s^\s\s*\s\s[\s\s>]*\s\s^)?)?(\s\s*)?(?:\s\s{\s\s{([\s\sw]+[\s\ss\s\sw]*)\s\s{)?(\s\s[[^\s\s]]*\s\s])?(?:\s\s}{3})?(\s\s>)?(\s\s.\s\s.\s\s.)?\s\ss*",\n handler: function(w)\n {\n // defopen=lookaheadMatch[1]\n // cookiename=lookaheadMatch[2]\n // header=lookaheadMatch[3]\n // panelwidth=lookaheadMatch[4]\n // rollover=lookaheadMatch[5]\n // class=lookaheadMatch[6]\n // label=lookaheadMatch[7]\n // blockquote=lookaheadMatch[8]\n // deferred=lookaheadMatch[9]\n\n lookaheadRegExp = new RegExp(this.lookahead,"mg");\n lookaheadRegExp.lastIndex = w.matchStart;\n var lookaheadMatch = lookaheadRegExp.exec(w.source)\n if(lookaheadMatch && lookaheadMatch.index == w.matchStart)\n {\n // location for rendering button and panel\n var place=w.output;\n\n // default to closed, no cookie, no accesskey\n var show="none"; var title=">"; var tooltip="show"; var cookie=""; var key="";\n\n // extra "+", default to open\n if (lookaheadMatch[1])\n { show="block"; title="<"; tooltip="hide"; }\n\n // cookie, use saved open/closed state\n if (lookaheadMatch[2]) {\n cookie=lookaheadMatch[2].trim().slice(1,-1);\n cookie="chkSlider"+cookie;\n if (config.options[cookie]==undefined)\n { config.options[cookie] = (show=="block") }\n if (config.options[cookie])\n { show="block"; title="<"; tooltip="hide"; }\n else\n { show="none"; title=">"; tooltip="show"; }\n }\n\n // parse custom label/tooltip/accesskey: [label=X|tooltip]\n if (lookaheadMatch[7]) {\n title = lookaheadMatch[7].trim().slice(1,-1);\n var pos=title.indexOf("|");\n if (pos!=-1) { tooltip = title.substr(pos+1,title.length); title=title.substr(0,pos); }\n if (title.substr(title.length-2,1)=="=") { key=title.substr(title.length-1,1); title=title.slice(0,-2); }\n if (pos==-1) tooltip += " "+title; // default tooltip: "show/hide <title>"\n }\n\n // create the button\n if (lookaheadMatch[3]) { // use "Hn" header format instead of button/link\n var lvl=(lookaheadMatch[3].length>6)?6:lookaheadMatch[3].length;\n var btn = createTiddlyElement(createTiddlyElement(place,"h"+lvl,null,null,null),"a",null,lookaheadMatch[6],title);\n btn.onclick=onClickNestedSlider;\n btn.setAttribute("href","javascript:;");\n btn.setAttribute("title",tooltip);\n }\n else\n var btn = createTiddlyButton(place,title,tooltip,onClickNestedSlider,lookaheadMatch[6]);\n\n // set extra button attributes\n btn.sliderCookie = cookie; // save the cookiename (if any) in the button object\n btn.defOpen=lookaheadMatch[1]!=null; // save default open/closed state (boolean)\n btn.keyparam=key; // save the access key letter ("" if none)\n if (key.length) {\n btn.setAttribute("accessKey",key); // init access key\n btn.onfocus=function(){this.setAttribute("accessKey",this.keyparam);}; // **reclaim** access key on focus\n }\n\n // "non-click" MouseOver open/close slider\n if (lookaheadMatch[5]) btn.onmouseover=onClickNestedSlider;\n\n // create slider panel\n var panelClass=lookaheadMatch[4]?"floatingPanel":"sliderPanel";\n var panel=createTiddlyElement(place,"div",null,panelClass,null);\n panel.button = btn; // so the slider panel know which button it belongs to\n panel.defaultPanelWidth=(lookaheadMatch[4] && lookaheadMatch[4].length>2)?lookaheadMatch[4].slice(1,-1):""; // save requested panel size\n btn.sliderPanel=panel;\n panel.style.display = show;\n panel.style.width=panel.defaultPanelWidth;\n\n // render slider (or defer until shown) \n w.nextMatch = lookaheadMatch.index + lookaheadMatch[0].length;\n if ((show=="block")||!lookaheadMatch[9]) {\n // render now if panel is supposed to be shown or NOT deferred rendering\n w.subWikify(lookaheadMatch[8]?createTiddlyElement(panel,"blockquote"):panel,this.terminator);\n // align slider/floater position with button\n window.adjustSliderPos(place,btn,panel,panelClass);\n }\n else {\n var src = w.source.substr(w.nextMatch);\n var endpos=findMatchingDelimiter(src,"+++","===");\n panel.setAttribute("raw",src.substr(0,endpos));\n panel.setAttribute("blockquote",lookaheadMatch[8]?"true":"false");\n panel.setAttribute("rendered","false");\n w.nextMatch += endpos+3;\n if (w.source.substr(w.nextMatch,1)=="\sn") w.nextMatch++;\n if (config.options.chkDebugLazySliderDefer) alert("deferred '"+title+"':\sn\sn"+panel.getAttribute("raw"));\n }\n }\n }\n }\n)\n\n// TBD: ignore 'quoted' delimiters (e.g., "{{{+++foo===}}}" isn't really a slider)\nfunction findMatchingDelimiter(src,starttext,endtext) {\n var startpos = 0;\n var endpos = src.indexOf(endtext);\n // check for nested delimiters\n while (src.substring(startpos,endpos-1).indexOf(starttext)!=-1) {\n // count number of nested 'starts'\n var startcount=0;\n var temp = src.substring(startpos,endpos-1);\n var pos=temp.indexOf(starttext);\n while (pos!=-1) { startcount++; pos=temp.indexOf(starttext,pos+starttext.length); }\n // set up to check for additional 'starts' after adjusting endpos\n startpos=endpos+endtext.length;\n // find endpos for corresponding number of matching 'ends'\n while (startcount && endpos!=-1) {\n endpos = src.indexOf(endtext,endpos+endtext.length);\n startcount--;\n }\n }\n return (endpos==-1)?src.length:endpos;\n}\n//}}}\n\n//{{{\nwindow.onClickNestedSlider=function(e)\n{\n if (!e) var e = window.event;\n var theTarget = resolveTarget(e);\n var theLabel = theTarget.firstChild.data;\n var theSlider = theTarget.sliderPanel\n var isOpen = theSlider.style.display!="none";\n // if using default button labels, toggle labels\n if (theLabel==">") theTarget.firstChild.data = "<";\n else if (theLabel=="<") theTarget.firstChild.data = ">";\n // if using default tooltips, toggle tooltips\n if (theTarget.getAttribute("title")=="show")\n theTarget.setAttribute("title","hide");\n else if (theTarget.getAttribute("title")=="hide")\n theTarget.setAttribute("title","show");\n if (theTarget.getAttribute("title")=="show "+theLabel)\n theTarget.setAttribute("title","hide "+theLabel);\n else if (theTarget.getAttribute("title")=="hide "+theLabel)\n theTarget.setAttribute("title","show "+theLabel);\n // deferred rendering (if needed)\n if (theSlider.getAttribute("rendered")=="false") {\n if (config.options.chkDebugLazySliderRender)\n alert("rendering '"+theLabel+"':\sn\sn"+theSlider.getAttribute("raw"));\n var place=theSlider;\n if (theSlider.getAttribute("blockquote")=="true")\n place=createTiddlyElement(place,"blockquote");\n wikify(theSlider.getAttribute("raw"),place);\n theSlider.setAttribute("rendered","true");\n }\n // show/hide the slider\n if(config.options.chkAnimate)\n anim.startAnimating(new Slider(theSlider,!isOpen,e.shiftKey || e.altKey,"none"));\n else\n theSlider.style.display = isOpen ? "none" : "block";\n // reset to default width (might have been changed via plugin code)\n theSlider.style.width=theSlider.defaultPanelWidth;\n // align slider/floater position with target button\n if (!isOpen) window.adjustSliderPos(theSlider.parentNode,theTarget,theSlider,theSlider.className);\n // if showing panel, set focus to first 'focus-able' element in panel\n if (theSlider.style.display!="none") {\n var ctrls=theSlider.getElementsByTagName("*");\n for (var c=0; c<ctrls.length; c++) {\n var t=ctrls[c].tagName.toLowerCase();\n if ((t=="input" && ctrls[c].type!="hidden") || t=="textarea" || t=="select")\n { ctrls[c].focus(); break; }\n }\n }\n if (this.sliderCookie && this.sliderCookie.length) {\n config.options[this.sliderCookie]=!isOpen;\n if (config.options[this.sliderCookie]!=this.defOpen)\n saveOptionCookie(this.sliderCookie);\n else { // remove cookie if slider is in default display state\n var ex=new Date(); ex.setTime(ex.getTime()-1000);\n document.cookie = this.sliderCookie+"=novalue; path=/; expires="+ex.toGMTString();\n }\n }\n return false;\n}\n\n// TW2.1 and earlier:\n// hijack Slider animation handler 'stop' handler so overflow is visible after animation has completed\nSlider.prototype.coreStop = Slider.prototype.stop;\nSlider.prototype.stop = function()\n { this.coreStop.apply(this,arguments); this.element.style.overflow = "visible"; }\n\n// TW2.2+\n// hijack Morpher animation handler 'stop' handler so overflow is visible after animation has completed\nif (version.major+.1*version.minor+.01*version.revision>=2.2) {\n Morpher.prototype.coreStop = Morpher.prototype.stop;\n Morpher.prototype.stop = function()\n { this.coreStop.apply(this,arguments); this.element.style.overflow = "visible"; }\n}\n\n// adjust panel position based on button position\nif (window.adjustSliderPos==undefined) window.adjustSliderPos=function(place,btn,panel,panelClass) {\n if (panelClass=="floatingPanel") {\n var left=0;\n var top=btn.offsetHeight; \n if (place.style.position!="relative") {\n var left=findPosX(btn);\n var top=findPosY(btn)+btn.offsetHeight;\n var p=place; while (p && p.className!='floatingPanel') p=p.parentNode;\n if (p) { left-=findPosX(p); top-=findPosY(p); }\n }\n if (left+panel.offsetWidth > getWindowWidth()) left=getWindowWidth()-panel.offsetWidth-15;\n panel.style.left=left+"px"; panel.style.top=top+"px";\n }\n}\n\nfunction getWindowWidth() {\n if(document.width!=undefined)\n return document.width; // moz (FF)\n if(document.documentElement && ( document.documentElement.clientWidth || document.documentElement.clientHeight ) )\n return document.documentElement.clientWidth; // IE6\n if(document.body && ( document.body.clientWidth || document.body.clientHeight ) )\n return document.body.clientWidth; // IE4\n if(window.innerWidth!=undefined)\n return window.innerWidth; // IE - general\n return 0; // unknown\n}\n//}}}